Tel: 86-532-85829520

Special Conveyor Belt

Special conveyor belts mainly include steel cord core belts, high angle belts, heat-resistant belts, cold-resistant belts, flame-retardant belts, wire mesh belts and steel belts.
1. Steel cord core belt: replace the fiber fabric belt conveyor belt with a number of flexible and high-strength special steel wire ropes (Fig. 2). Since the 1960s, the steel cord core has a large number of applications, its breaking strength can be as high as 7000 N/mm, the elastic elongation is very small, the lateral stiffness is small, and the impact resistance is good. Long-distance belt conveyors mostly use such conveyor belts and are also used in some belt feeders.
2. high angle belt: including short pattern belt, high pattern belt, horizontal partition belt and rib belt type.
3. Heat-resistant belt: conveyor belt with special rubber as cover material, the temperature of the material can be up to 800 °C.
4. Cold-resistant belt: It is also a conveyor belt made of special rubber as a covering material, which can be used in an environment of -55 °C.
5. Refractory belt: conveyor belt made of polyvinyl chloride or special rubber as covering material, mainly used in underground coal mines. It is less prone to flames and causes an explosion when it is strongly rubbed against rollers or other parts.
6. Metal mesh belt: It is made of metal wire and has no covering layer. It is used to transport materials from -55 to 1200 °C or to complete the dewatering operation of materials during transportation.
7. steel strip: made of cold-rolled steel sheet with a thickness of 0.2 to 4 mm, mostly used in conveyors in drying ovens.
8. steel rope traction belt.
As one of the leading special conveyor belt manufacturers and suppliers in China, we warmly welcome you to wholesale quality special conveyor belt for sale here from our factory. For price consultation, contact us.
  • SW Conveyor Belt

    Contact Now

    SW Conveyor Belt

    The SW Conveyor Belt is a new type of structural conveyor belt emerging internationally, accounting for 10% and 20% of the total conveyor belt.
    Compared with the current whole core conveyor belt, the straight-through conveyor belt is the same strength material, the multi-layer structure...
    Read More

  • Ripstop Conveyor Belt

    Contact Now

    Ripstop Conveyor Belt

    Rip stop conveyor belt is mainly used to prevent the belt from penetrating or cut due to outside force factor during the conveying that cause risk of belt damage or broken.
    Rip stop conveyor belt provides a special rip stop breaker inserted in top cover, this rip stop breaker has...
    Read More

  • Fabric Impression Conveyor Belt

    Contact Now

    Fabric Impression Conveyor Belt

    Fabric impression belt Mini Rough top belt:
    Slight impression:
    ●one-sided impression
    ●two-sided impression
    ●width range: 1200-2000mm
    Read More

  • Cross Rigid Conveyor Belt

    Contact Now

    Cross Rigid Conveyor Belt

    The Cross Rigid Conveyor Belt is designed for applications that require sharp flips with heavy studs and/or corrugated sidewalls.
    It is rigid in the belt (rigid or weft) but remains flexible over the length (warp direction) of the belt to wrap the pulley. It adds a monofilament...
    Read More

  • Bare Back Conveyor Belt

    Contact Now

    Bare Back Conveyor Belt

    Bare Back Conveyor Belt is suitable for lightweight materials.
    Used where the belts run on steel, wood or some other low-friction surface (sliding bed), and for belts with low friction back and top cover.
    Comparing with standard belting it has a lower friction coefficient between...
    Read More

  • Pipe Conveyor Belt

    Contact Now

    Pipe Conveyor Belt

    Pipe Conveyor Belt Description: 1.Primarily used where bulk materials must be conveyed along horizontal and vertical curves in confined spaces, and/or where the environment has to be protected resp. where spillage must be avoided. 2.The belt can negotiate tight horizontal and vertical curves....Read More

  • Elevator Conveyor Belt

    Contact Now

    Elevator Conveyor Belt

    Elevator Conveyor Belt Elevator conveyor belts: The belt is made of either anti-tearing EP canvas or steel cord as center material with anti-tearing rubber cover, good application capability, running steadily, low maintenance. Construction: Rubber belt & elevator bucket. Characteristics:...Read More

  • Endless Conveyor Belt

    Contact Now

    Endless Conveyor Belt

    Endless conveyor belt Description: Endless conveyor belt is conveyor belt that has been made into endless without joint in the process of production. Characteristics: 1.Its feature is that there is no joint in belt carcass, and the belt shall not be shortened in service life due to early failure...Read More

  • Sidewall Conveyor Belt

    Contact Now

    Sidewall Conveyor Belt

    Sidewall conveyor belt Description: Sidewall conveyor belt can be used for horizontal, sloping or vertical conveyance, it is one of the most effective ways of elevating materials in a confined space, the economy is achieved by single belt operation, wide range material can be handled, less space...Read More

  • White Rubber Conveyor Belt

    Contact Now

    White Rubber Conveyor Belt

    White Belt Application: Used for the transportation bulk food products in applications such as sugar, dock side facilities, silos and food factories. ●Versatile and durable for long life and economy ●Stain resistance and high in strength ●Odorless, tasteless, and non-toxicRead More

  • Pumping Elevator Belt

    Contact Now

    Pumping Elevator Belt

    Elevator Conveyor Belting Elevator conveyor belts: The belt is made of either anti-tearing EP canvas or steel cord as center material with anti-tearing rubber cover, good application capability, running steadily, low maintenance. Construction: Rubber belt & elevator bucket. Characteristics:...Read More