EE Conveyor Belt
The EE fabric conveyor belt is made of ee fabric and rubber cover.
For such a conveyor belt, the ee fabric and the core rubber are first laminated together by cold pressing, and then the top rubber and the bottom rubber and the core fabric are made together by vulcanization.
The EE fabric conveyor belt is one of the traditional conveyor belts and is widely used in ports, wood transfer or other light industries.
Detailed description
Description
The EE conveyor belt is made up of a combination of multi-layer polyester (polyester, ribbon polyester amide) canvas in a certain way, covering the high-bonding and flexible wear-resistant rubber from top to bottom. It is used to transport small to medium/block/powder materials and is suitable for long distance, high load and high speed conveying of materials.
Standards | Cover Rubber | Adhesion | ||||
Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | |
DIN 22102 | Mpa | % | mm3 | N/mm | N/mm | N/mm |
DIN 22102-Z | 15 | 350 | 250 | 3.5 | 4.5 | 5 |
DIN 22102-W | 18 | 400 | 90 | 3.5 | 4.5 | 5 |
DIN 22102-Y | 20 | 400 | 150 | 3.5 | 4.5 | 5 |
DIN 22102-X | 25 | 450 | 120 | 3.5 | 4.5 | 5 |
Feature and application
1. The belt has low warp elongation, good weft plasticity, good water resistance and good wet strength. It is suitable for medium, long distance and heavy load transportation.
2. EE Conveyor Belt is suitable for medium, long distance and heavy load transportation of aggregate, cement, coal, foundry coal, grain, hard rock, wood products, sand and other materials.
